Home 5 iNavigator Legacy Product Page

iNAVIGATOR LEGACY APS

A complete, compliant, and easy-to-use Accessible Pedestrian Signal (APS) with options for two- and three-wire installations.

Note: The iDS/iNS is the new, current production model and offers a significant upgrade to the iNavigator.

A yellow Polara iNavigator APS.
ADA compliant
PROWAG
MUTCD compliant
Buy America compliant
ISO 9001:2015 certified

Features

A yellow Polara iNavigator APS installed on a pole.

Bluetooth logoWireless communication

Secure wireless connectivity via Bluetooth® and wifi provide easy, fast, and secure programming from iOS/Android devices.

Advanced push button technology

The iNavigator uses a durable “Hall effect” push button that allows for adjustable actuation force and a long service life.

Dual-side speaker

All sounds emanate from the front and back of the unit while automatically adjusting to ambient noise levels.

Confirmation signals

A sunlight-visible red LED latches “ON” and a tactile arrow vibrates to confirm the button has been pushed. 

Why you should upgrade to the iDS/iNS

The iDS/iNS is our current model of APS, and represents a significant upgrade to the iNavigator series. The iDS comes with a built-in radar unit for touchless activation, while both the iDS and iNS feature secure wireless connectivity via Bluetooth 5 for greater speed, range, and app capabilities. Both are compatible with PedApp, Polara’s pedestrian mobility app that allows users to access audible crossing information and remotely activate signals from their smartphone.

Resources

Shelf Mount Control Unit

The part number for ordering is iCCU-S.

This control unit is a universal control unit that can be used in any style traffic cabinet. It is designed to sit on a shelf, and interfaces to the Traffic Cabinet either through the Polara 50 pin cable assembly, or a SDLC cable. Download the cut sheet.

Card Rack/300 Series Control Unit

The part number for ordering is iCCU-C.

This control unit is designed for use in 300 Series type Traffic Cabinets. It plugs into the detector rack and takes up two slots. Download the cut sheet.

iN3 Ped Head Control Unit

The part number for ordering is iPHCU3W

 

This is the Control Unit that mounts in the Pedestrian Signal Head (PED Head), takes power from the 120 VAC power to the walk/don't walk light signals, and operates the Push Button Station via 3 wires that connect the Control Unit to the Push Button Station. One Control Unit is required for each Push Button Station. Download the cut sheet
Polara PC App Dongle

PC App Dongle

The part number for ordering is iN-DGL

This Dongle is required for using a personal computer along with Polara's free PC APP to communicate with an iNS push button station or an iCCU. Your personal computer must have Windows 7 or higher. Download the cutsheet
iNS Set Up Box

iN Set Up Box

The part number for ordering is iNS-SUB.

This Set Up Box is for powering an iNS3, or an iNS2 (as a 3 Wire), and also earlier iN Series (iN3 & iN2 as a 3 Wire) push button stations in 3 Wire Mode so they can be set up or programmed in the shop or at ones desk without being connected to a traffic cabinet or PED head. Download the cutsheet
iCCU-S2 Interconnect Board

iCCU-S Interconnect Board

The part number for ordering is iN2-ICB.

 

This Interconnect Board is required for landing of intersection/field button wires when an iCCU-S2 Control Unit is used. Download the cutsheet
iCCU-C2 Interconnect Board

iCCU-C Interconnect Board

The part number for ordering the interconnect board is iN2-ICB-C.

 

This Interconnect Board and Power Supply (purchased separately, PN: iN2-150WPS-C) is required for landing of intersection/field button wires when an iCCU-C2 Control Unit is used. The Power Supply connects to the Interconnect Board and provides the necessary additional power to operate the push button stations. Dowload the cutsheet
Polara iNavigator 50 pin connector cable assembly

50 pin connector cable assembly

The part numbers for ordering are mentioned in the cutsheet.

 

This is the same 50 pin cable assembly used with the EZ CCU2EN and is required when the iCCU-S is used without SDLC. It comes in three different cable length options. See EZ Control Unit download section for details. Download the cutsheet
Polara 50 Pin 2-Cable Harness

50 Pin 2-Cable Harness

The part number for ordering is 811-207.

 

This 2-Cable harness is used to connect an iCCU-S to a traffic cabinet's pedestrian input files, and if needed preemption or general purpose inputs. See Cut sheet for use cases. Download the cutsheet
iCCU-S2 Standard SDLC Cable

Standard SDLC Cable

The part number for ordering is iN2-SDLC-CABLE.

 

This cable is a standard 6' long SDLC cable used with the iCCU-S when SDLC is used. Download the cutsheet
SDLC Y Cable

SDLC "Y" Cable

The part number for ordering is iN2-SDLC-YCABLE.

 

This is a custom SDLC cable for use when there are no extra/available SDLC connection points in an intersection traffic cabinet. It allows our Control Units to be able to tap into an existing SDLC connection. Download the cutsheet
iCCU-C2 150 Watt Power Supply

iCCU-C2 150 Watt Power Supply

The part number for ordering is iN2-150WPS-C.

 

This is the power supply used in conjunction with an iCCU-C and iN2-ICB-C. Download the cutsheet
iCCU-C2 C4 Cable Harness

iCCU-C2 C4 Cable Harness

The part number for ordering is iN2-C4-CABLE-C.

 

This cable is used to interface the iCCU-C to a 300 series traffic cabinet. Download the cutsheet
CCU-BRKT Mount

CCU-BRKT Mount

The part number for ordering this mount is CCU-BRKT.

 

This mount is designed to hold a CCU2EN, iCCU-S or iCCU-S2 type control unit and bolt to a rack channel with EIA universal spacing. Download the cutsheet
Adapter for mounting two iNS PBS' on a 2.9

Adapter for mounting two iNS PBS' on a 2.9" OD Pole

The part number for ordering is iNSDM-2.9-B

 

This adapter is for mounting two iNS iNavigator push button stations on a 2.9" OD pole (2.5" ID) so that they can use 9X12 or 9X15 signs and not touch. It comes in the standard color black. Download the cutsheet
Adapter for Mounting Two iNavigators on a 4 inch Pole

Adapter for Mounting Two iNavigators on a 4.5 OD Pole

The part number for ordering is iNSPA4X2-B.

 

This adapter is designed to offset two iNavigators with 9x12 or 9x15 signs on a 4.5" OD pole. This product is only offered in the color black. Download the cutsheet
iNS Fluted Mounting Adaptor

iNS Fluted Mounting Adaptor

The part number for ordering is iNSPA-B-FP.

 

This adapter is designed to allow an "iN" or "iNS" Navigator or PBF2C to be mounted directly on, or up to 20 degrees to either side of a flute. This product is only offered in the color black. Download the cutsheet
Push Button Station Conduit Mount

Push Button Station Conduit Mount

The part number for ordering is PBSCM.

 

This mount is designed to facilitate easy routing and connection of ½" diameter conduit to the bottom of the mount, prior to securing an iNS/iDS (or any other Polara model push button with the same form factor), to a wooden pole, or flat concrete or metal surface that does not allow internal wire routing to the button. Download the cutsheet
Pole Cap for iNavigator Push Button Station mounted to a 2.9 inch OD Pole

Pole Cap for iNavigator Push Button Station

The part number for ordering is iNS-WPC-B.

 

This pole cap attaches to an iNS iNavigator Push Button Frame and covers the top of a 2.9" OD stub pole used to mount iNavigators close to the start of a crosswalk. Download the cutsheet
Mounting Extender for iN & iNS Navigator

Mounting Extender for iN & iNS Navigator

The part numbers for ordering are iNS-EXT-06 & iNS-EXT-12.

 

This mounting extender is designed to mount an "iN" or "iNS" Navigator, PBF2, or PBF2C either 6" or 12" from a traffic pole in order to extend the unit closer to the crosswalk. Download the cutsheet
Polara iNS Angled Mounting Extender

Angled Mounting Extender for iN & iNS Navigator

The part numbers for ordering are iNS-EXTANG-06 & iNS-EXTANG-12..

 

This mounting extender is angled down and designed to reduce button mounting height of up to approximately 5". Download the cutsheet
Polara iNS Height Reducing Mounting Extender

Height Reducing Mounting Extender for iN & iNS Navigator

The part number for ordering is iNS-EXTHTRED

 

This mounting extender is curved down and designed to reduce/adjust button mounting height of up to 15". Download the cutsheet
Polara iNS Push Button Sign Backplate 9 X 12

iNS 9 X 12 Push Button Sign Backplate

The part number for ordering is PBFA9X12-X.

 

This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9” x 12” crosswalk sign. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow. Download the cutsheet
Polara iNS Push Button Sign Backplate 9 X 15

iNS 9 X 15 Push Button Sign Backplate

The part number for ordering is PBFA9X15-X

 

This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9” x 15” crosswalk sign. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow. Download the cutsheet
Polara iNS Bi-directional Button Assembly

iNS Bi-directional Button Assembly

The part number for ordering is 850-491-2.

 

If you need to field replace a R/L arrow button, this assembly is for a bi-direction application.
Polara iNS No Arrow Button Assembly

iNS No Arrow Button Assembly

The part number for ordering is 850-491-3.

 

If you need to field replace a R/L arrow button, this assembly is for a no-arrow application. A typical application is a scramble intersection.
Polara iNS R/L Arrow Button Assembly

iNS R/L Arrow Button Assembly

The part number for ordering is 850-491-1.

 

If you need to field replace a R/L arrow button, this assembly is for a bi-direction application.

iNS Color Change Kit

The part number for ordering is iNS/iDS-CCK-YY-RR.

 

This color change kit is a bundle of the required parts needed to change the Front Cover color on an iNavigator PBS. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow. Download the cutsheet
Polara iNS Field Installable Replacement Speaker

iNS Field Installable Replacement Speaker

The part number for ordering is iNS-SPKR

 

This speaker is set up to allow easy field replacement of an iNavigator PBS speaker. Download the cutsheet
Polara iNS External Speaker for ES Option

iNS External Speaker for ES Option

The part number for ordering is 2WEXTSPKR.

 

This is an external horn style speaker that typically installs on a PED Head for the purpose of providing greater directed volume on large intersections, or beaconing on intersections. This external speaker is connected to a iNS Push Button Station (PBS) with the -ES option.
Polara iNS Matching Color Paint

iNS Matching Color Paint

The part number for ordering Yellow is 190-1056

 

You can purchase cans of spray paint in the colors that match Polara's black, green and yellow powder coat colors. Part numbers for ordering are as follows: 190-1054 for black, 190-1055 for green, 190-1056 for yellow.
Polara iNS Universal 90 Degree Adaptor

iNS Universal 90 Degree Adaptor

The part number for ordering is iNS-90DEGADPTR.

 

This adapter designed to mount all iNavigator models (iN & INS) & push button station models (PBF2 & PBF2C) to either the right or the left of a mounting extender. reduce/adjust button mounting height of up to 15". Finish is aluminum with black powdercoat. Download the cutsheet
Polara iNS 3-Wire Cable

iNS 3-Wire Cable

The part number for ordering is iN3-CABLE-12.

 

This is the cable that is used to connect the iPHCU3S to the iNS in 3-wire mode or iNS3 (3-wire only unit) iNavigator Push Button Station and comes in a 12, 25 and 50 foot lengths. Part numbers for ordering are iN3-CABLE-12 for 12', iN3-CABLE-25 for 25', iN3-CABLE-50 for 50' Download the cutsheet

iNS 2-Wire Installation onto Pole

 

iCCU-S2 Install TS1 Hard Wired

 

iCCU-S2 Install TS2 SDLC Hybrid

 

iCCU-S2 Install TS2 BIU

 

iNavigator Banding Straps Install

 

iNS 3-Wire Installation onto pole

 

iPHCU3S Install into Signal Head

 

"Signal Guy" Polara Systems Review

 

"Signal Guy" Polara iCCU Programming

 

Shelf Mount Control Unit

The part number for ordering is iCCU-S.

This control unit is a universal control unit that can be used in any style traffic cabinet. It is designed to sit on a shelf, and interfaces to the Traffic Cabinet either through the Polara 50 pin cable assembly, or a SDLC cable. Download the cut sheet.

Card Rack/300 Series Control Unit

The part number for ordering is iCCU-C.

This control unit is designed for use in 300 Series type Traffic Cabinets. It plugs into the detector rack and takes up two slots. Download the cut sheet.

iN3 Ped Head Control Unit

The part number for ordering is iPHCU3W

 

This is the Control Unit that mounts in the Pedestrian Signal Head (PED Head), takes power from the 120 VAC power to the walk/don't walk light signals, and operates the Push Button Station via 3 wires that connect the Control Unit to the Push Button Station. One Control Unit is required for each Push Button Station. Download the cut sheet
Polara PC App Dongle

PC App Dongle

The part number for ordering is iN-DGL

This Dongle is required for using a personal computer along with Polara's free PC APP to communicate with an iNS push button station or an iCCU. Your personal computer must have Windows 7 or higher. Download the cutsheet
iNS Set Up Box

iN Set Up Box

The part number for ordering is iNS-SUB.

This Set Up Box is for powering an iNS3, or an iNS2 (as a 3 Wire), and also earlier iN Series (iN3 & iN2 as a 3 Wire) push button stations in 3 Wire Mode so they can be set up or programmed in the shop or at ones desk without being connected to a traffic cabinet or PED head. Download the cutsheet
iCCU-S2 Interconnect Board

iCCU-S Interconnect Board

The part number for ordering is iN2-ICB.

 

This Interconnect Board is required for landing of intersection/field button wires when an iCCU-S2 Control Unit is used. Download the cutsheet
iCCU-C2 Interconnect Board

iCCU-C Interconnect Board

The part number for ordering the interconnect board is iN2-ICB-C.

 

This Interconnect Board and Power Supply (purchased separately, PN: iN2-150WPS-C) is required for landing of intersection/field button wires when an iCCU-C2 Control Unit is used. The Power Supply connects to the Interconnect Board and provides the necessary additional power to operate the push button stations. Dowload the cutsheet
Polara iNavigator 50 pin connector cable assembly

50 pin connector cable assembly

The part numbers for ordering are mentioned in the cutsheet.

 

This is the same 50 pin cable assembly used with the EZ CCU2EN and is required when the iCCU-S is used without SDLC. It comes in three different cable length options. See EZ Control Unit download section for details. Download the cutsheet
Polara 50 Pin 2-Cable Harness

50 Pin 2-Cable Harness

The part number for ordering is 811-207.

 

This 2-Cable harness is used to connect an iCCU-S to a traffic cabinet's pedestrian input files, and if needed preemption or general purpose inputs. See Cut sheet for use cases. Download the cutsheet
iCCU-S2 Standard SDLC Cable

Standard SDLC Cable

The part number for ordering is iN2-SDLC-CABLE.

 

This cable is a standard 6' long SDLC cable used with the iCCU-S when SDLC is used. Download the cutsheet
SDLC Y Cable

SDLC "Y" Cable

The part number for ordering is iN2-SDLC-YCABLE.

 

This is a custom SDLC cable for use when there are no extra/available SDLC connection points in an intersection traffic cabinet. It allows our Control Units to be able to tap into an existing SDLC connection. Download the cutsheet
iCCU-C2 150 Watt Power Supply

iCCU-C2 150 Watt Power Supply

The part number for ordering is iN2-150WPS-C.

 

This is the power supply used in conjunction with an iCCU-C and iN2-ICB-C. Download the cutsheet
iCCU-C2 C4 Cable Harness

iCCU-C2 C4 Cable Harness

The part number for ordering is iN2-C4-CABLE-C.

 

This cable is used to interface the iCCU-C to a 300 series traffic cabinet. Download the cutsheet
CCU-BRKT Mount

CCU-BRKT Mount

The part number for ordering this mount is CCU-BRKT.

 

This mount is designed to hold a CCU2EN, iCCU-S or iCCU-S2 type control unit and bolt to a rack channel with EIA universal spacing. Download the cutsheet
Adapter for mounting two iNS PBS' on a 2.9

Adapter for mounting two iNS PBS' on a 2.9" OD Pole

The part number for ordering is iNSDM-2.9-B

 

This adapter is for mounting two iNS iNavigator push button stations on a 2.9" OD pole (2.5" ID) so that they can use 9X12 or 9X15 signs and not touch. It comes in the standard color black. Download the cutsheet
Adapter for Mounting Two iNavigators on a 4 inch Pole

Adapter for Mounting Two iNavigators on a 4.5 OD Pole

The part number for ordering is iNSPA4X2-B.

 

This adapter is designed to offset two iNavigators with 9x12 or 9x15 signs on a 4.5" OD pole. This product is only offered in the color black. Download the cutsheet
iNS Fluted Mounting Adaptor

iNS Fluted Mounting Adaptor

The part number for ordering is iNSPA-B-FP.

 

This adapter is designed to allow an "iN" or "iNS" Navigator or PBF2C to be mounted directly on, or up to 20 degrees to either side of a flute. This product is only offered in the color black. Download the cutsheet
Push Button Station Conduit Mount

Push Button Station Conduit Mount

The part number for ordering is PBSCM.

 

This mount is designed to facilitate easy routing and connection of ½" diameter conduit to the bottom of the mount, prior to securing an iNS/iDS (or any other Polara model push button with the same form factor), to a wooden pole, or flat concrete or metal surface that does not allow internal wire routing to the button. Download the cutsheet
Pole Cap for iNavigator Push Button Station mounted to a 2.9 inch OD Pole

Pole Cap for iNavigator Push Button Station

The part number for ordering is iNS-WPC-B.

 

This pole cap attaches to an iNS iNavigator Push Button Frame and covers the top of a 2.9" OD stub pole used to mount iNavigators close to the start of a crosswalk. Download the cutsheet
Mounting Extender for iN & iNS Navigator

Mounting Extender for iN & iNS Navigator

The part numbers for ordering are iNS-EXT-06 & iNS-EXT-12.

 

This mounting extender is designed to mount an "iN" or "iNS" Navigator, PBF2, or PBF2C either 6" or 12" from a traffic pole in order to extend the unit closer to the crosswalk. Download the cutsheet
Polara iNS Angled Mounting Extender

Angled Mounting Extender for iN & iNS Navigator

The part numbers for ordering are iNS-EXTANG-06 & iNS-EXTANG-12..

 

This mounting extender is angled down and designed to reduce button mounting height of up to approximately 5". Download the cutsheet
Polara iNS Height Reducing Mounting Extender

Height Reducing Mounting Extender for iN & iNS Navigator

The part number for ordering is iNS-EXTHTRED

 

This mounting extender is curved down and designed to reduce/adjust button mounting height of up to 15". Download the cutsheet
Polara iNS Push Button Sign Backplate 9 X 12

iNS 9 X 12 Push Button Sign Backplate

The part number for ordering is PBFA9X12-X.

 

This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9” x 12” crosswalk sign. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow. Download the cutsheet
Polara iNS Push Button Sign Backplate 9 X 15

iNS 9 X 15 Push Button Sign Backplate

The part number for ordering is PBFA9X15-X

 

This sign back plate is designed to be attached to any iNavigator PBS or any Push Button Frame, for mounting a 9” x 15” crosswalk sign. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow. Download the cutsheet
Polara iNS Bi-directional Button Assembly

iNS Bi-directional Button Assembly

The part number for ordering is 850-491-2.

 

If you need to field replace a R/L arrow button, this assembly is for a bi-direction application.
Polara iNS No Arrow Button Assembly

iNS No Arrow Button Assembly

The part number for ordering is 850-491-3.

 

If you need to field replace a R/L arrow button, this assembly is for a no-arrow application. A typical application is a scramble intersection.
Polara iNS R/L Arrow Button Assembly

iNS R/L Arrow Button Assembly

The part number for ordering is 850-491-1.

 

If you need to field replace a R/L arrow button, this assembly is for a bi-direction application.

iNS Color Change Kit

The part number for ordering is iNS/iDS-CCK-YY-RR.

 

This color change kit is a bundle of the required parts needed to change the Front Cover color on an iNavigator PBS. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow. Download the cutsheet
Polara iNS Field Installable Replacement Speaker

iNS Field Installable Replacement Speaker

The part number for ordering is iNS-SPKR

 

This speaker is set up to allow easy field replacement of an iNavigator PBS speaker. Download the cutsheet
Polara iNS External Speaker for ES Option

iNS External Speaker for ES Option

The part number for ordering is 2WEXTSPKR.

 

This is an external horn style speaker that typically installs on a PED Head for the purpose of providing greater directed volume on large intersections, or beaconing on intersections. This external speaker is connected to a iNS Push Button Station (PBS) with the -ES option.
Polara iNS Matching Color Paint

iNS Matching Color Paint

The part number for ordering Yellow is 190-1056

 

You can purchase cans of spray paint in the colors that match Polara's black, green and yellow powder coat colors. Part numbers for ordering are as follows: 190-1054 for black, 190-1055 for green, 190-1056 for yellow.
Polara iNS Universal 90 Degree Adaptor

iNS Universal 90 Degree Adaptor

The part number for ordering is iNS-90DEGADPTR.

 

This adapter designed to mount all iNavigator models (iN & INS) & push button station models (PBF2 & PBF2C) to either the right or the left of a mounting extender. reduce/adjust button mounting height of up to 15". Finish is aluminum with black powdercoat. Download the cutsheet
Polara iNS 3-Wire Cable

iNS 3-Wire Cable

The part number for ordering is iN3-CABLE-12.

 

This is the cable that is used to connect the iPHCU3S to the iNS in 3-wire mode or iNS3 (3-wire only unit) iNavigator Push Button Station and comes in a 12, 25 and 50 foot lengths. Part numbers for ordering are iN3-CABLE-12 for 12', iN3-CABLE-25 for 25', iN3-CABLE-50 for 50' Download the cutsheet

iNS 2-Wire Installation onto Pole

 

iCCU-S2 Install TS1 Hard Wired

 

iCCU-S2 Install TS2 SDLC Hybrid

 

iCCU-S2 Install TS2 BIU

 

iNavigator Banding Straps Install

 

iNS 3-Wire Installation onto pole

 

iPHCU3S Install into Signal Head

 

"Signal Guy" Polara Systems Review

 

"Signal Guy" Polara iCCU Programming