Legacy EZCOMM Navigator APS by Polara

EN25B

Legacy EZCOMM Navigator APS by Polara

EN29U

iNtelligent Navigator APS sign by Polara

EN23T

Click on any of the below panels to view downloadable content for this product:
  • EZ COMM Navigator 2-Wire System

    This is the specification/cut sheet for the EN 2-Wire Navigator System

    Read More

  • CCU2EN

    This is the specification/cut sheet for the CCU2EN which is the control unit used with the EN 2-Wire System

    Read More

  • EZ COMM Navigator 2-Wire Sales Brochure

    EN2 Navigator Sales Brochure

    Read More

  • Universal Order Form

    Form for ordering EN Navigator push button stations configured as desired.

    Read More

  • Product Catalog

    This is the Product Catalog that shows all Traffic Products

    Read More

  • CCU2EN- CCU with USB and Ethernet Port (Does not include CCU2ENHK)

    The CCU2EN is the Control Unit for the EZCOMM Navigator System, is installed inside the Traffic Cabinet and is powered by the AC supply mains (115 VAC). The CCU2EN is the power supply and signaling interface between the existing intersection Traffic Control Unit and Navigator Push Button Stations (EPBS). Part number for ordering is CCU2EN.

    Read More

  • CCU2ENHK_ Cabinet Control Unit Hardware Kit (1 per CCU2EN required)

    The CCU2ENHK includes the 50 pin connector/cable assembly, Interconnect Board, and Installation Instructions. The cable assembly has 8' long cables for cable #'s 1, 2 and 4. Cable #3 which is for special functions and preemption is 4' long. Part number for ordering is CCU2ENHK.

  • CCU2ENHK-8

    Same as CCU2ENHK but cable #3 is 8' long to facilitate easier set up of preemption. (All cables are 8' long) Part number for ordering is CCU2ENHK-8

  • CCU2ENHK-12

    Same as CCU2ENHK but all cables are 12' long to facilitate installation in a double width cabinet. Part number for ordering is CCU2ENHK-12.

  • Interconnect Board

    Same Interconnect Board that is in CCU2ENHK. Can be ordered separately as PN 850-317.

  • Connector/Cable Assembly with all 8' cables

    This is the same Connector/Cable Assembly that is in the CCU2ENHK-8. It can be ordered separately as PN 850-390

  • Connector/Cable Assembly with all 12' cables

    This is the same Connector/Cable Assembly that is in the CCU2ENHK-12. It can be ordered separately as PN 850-216

  • Mounting Plate for CCU and LPBCU

    Read More

  • Preemption Adapter for use with Opticom/GTT 500 or 799 series systems

    When the EV common is not the same voltage as the DC cabinet voltage supply, this adapter is required. We are told that when an Opticom/GTT 500 or 700 series preemption system is installed, and the Navigator preemption broadcast message is desired, because the required voltage output is not provided by the Opticom/GTT equipment, this adapter is required in order to make the Navigator broadcast message play correctly.

    Read More

  • CCU-BRKT

    This mount is designed to hold a CCU2EN or iCCU-S/BIU type control unit and bolt to a rack channel with EIA universal spacing.

    All features are mirrored so that it can be mounted on the left or right rack channel.

    Read More

  • EZ Configurator (For N2, EN2, N4 and EN4 Systems)

    The EZ Configurator is a hand held infrared remote used for configuring a Navigator 2 Wire System or individual 2 and 4 Wire Navigator Push Button Stations (PBS). This grey colored model is backward compatible and works with N2 and N4 models. The older, black model is not compatible with EN2 and EN4 PBS. Part number for ordering is ECONFIG

    Read More

  • Pole Adapter for mounting two 9X12 or 9X15 Navigators on a 4” pole

    This adapter is used to mount two Navigator PBS on a 4” diameter pole so that two 9” X 12” (or 9" X 15") signs can be mounted without conflict. Set of two adapters with hardware is provided. One adapter is needed behind each Navigator. Part number for ordering is NPA4X2-X. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow.

    Read More

  • Adapter for Mounting a Navigator on a Fluted Pole

    This adapter is a modified version of one of the NPA4X2 adapters designed to clear the flutes on fluted poles so a Navigator PBS can be mounted directly on, or up to 20 degrees to either side of a scallop. Because the flutes on poles can vary significantly Polara does not guarantee this adapter will work on every style of fluted pole. To the best of Polara's knowledge it has worked on every pole design so far. If you have a pole design where it does not work, please let us know and we will refund your purchase. This product is only offered in the color black. Part number for ordering is NPA-B-FP.

    Read More

  • Pole Cap for EN Navigator on 2.5" ID pole (inside diameter)

    This pole cap is designed to attach to an EN push button station and cover the top of a 2.5 inch stub pole. The part number to order is ENWPC-X. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow.

    Read More

  • EZ Navigator Pole Extender

    The EZ Navigator Pole Extender facilitates mounting a Push Button Station (EPBS) 6” or 12” away from the traffic pole, in order to position the EPBS closer to the start of the crosswalk. Standard sizes are 6" and 12" extensions from the pole. Made of welded steel with hot dip galvanize finish. Custom lengths can be quoted and provided for minimum order quantities. Part number for ordering is EZ523-06 for 6" and EZ523-12 for 12".

    Read More

  • 9"X12" Navigator or Push Button Sign Back Plate

    This sign back plate is designed to be attached to Navigator EPBS or a Push Button Frame, for mounting 9” x 12” crosswalk sign. The part number to order is PBFA9X12-X. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow.

    Read More

  • 9"X15" Navigator or Push Button Sign Back Plate

    This sign back plate is designed to be attached to Navigator EPBS or a Push Button Frame, for mounting 9” x 15” crosswalk sign. The part number to order is PBFA9X15-X. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow.

    Read More

  • Button Diaphragm Assembly, Bi-Directional Arrow

    If you need to field replace a R/L arrow button, this assembly is for a bi-direction application. Part number for ordering is 850-278.

  • Button Diaphragm Assembly, No Arrow

    If you need to field replace a R/L arrow button, this assembly is for a no arrow application. A typical application is a scramble intersection. Part number for ordering is 850-279.

  • Button Diaphragm Assembly, R-L Arrow

    If you need to field replace a R/L arrow button, this assembly is the replacement button. Part number for ordering is 850-277.

  • Field Installable Speaker for ENavigator Push Button Station

    This speaker is for replacing an ENavigator speaker in the field. Included is a gasket and 4 mounting screws. The part number for ordering is 850-187.

  • EZ Comm PBS Sound Baffle

    This Sound Baffle is a small external plastic part used to re-direct the sound from the EZ Communicator resulting in an approximate 10dBA reduction in sound projection on side of the unit it is installed on. Ideal for use when a Navigator Push Button Station is installed near a home or apartment where sound might be disruptive to nearby residents.

    Read More

  • EZ Ped Station Color Change Kit

    This color change kit is a bundle of the required parts needed to change the Front Cover color on an EZComm Navigator EPBS. Part number for ordering is EZ520-X. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow.

    Read More

  • EZ Navigator Bottom Cover with Conduit Fitting

    This cover is to facilitate connecting flexible conduit to an EZ Communicator Navigator Push Button Station (EPBS) when mounted onto a wood pole or solid surface where the wiring cannot be routed through the regular wire routing hole on the back of the Navigator. Part number for ordering is EZ521-X. To designate color in place of X use "B" for black, "G" for green and "Y" for yellow.

    Read More

  • EZ 2 Wire Set Up Cable (For 2-Wire only)

    This is a custom cable harness that works in conjunction with a CCU2EN to allow quick set up of EN2 push button stations in a shop environment, without the CCU2EN having to be connected to a Traffic Control Cabinet. The part number for ordering is EZ220.

    Read More

  • EZ USB Uploader

    The EZ USB Uploader (Security Box) is a programming tool with dual USB ports, for use with any EZ Communicator product to easily update product software, audio sounds, or configuration. Part number for ordering is EZ510

    Read More

  • External Speaker for ES option

    This is an external horn style speaker that typically installs on a PED Head for the purpose of providing greater directed volume on large intersections, or beaconing on intersections. Part number for ordering is 2WEXTSPKR. This external speaker is connected to a Navigator EN2 or EN4 Push Button Station (PBS) with the -ES option (see below). The EN Navigator PBS must be ordered with the -ES option in order for this external speaker to work in conjunction with the PBS.

  • Matching Color Paint

    You can purchase cans of spray paint in the colors that match Polara's black, green and yellow powder coat colors. Part numbers for ordering are as follows:
    190-1054 for black
    190-1055 for green
    190-1056 for yellow.

  • -ES External Speaker PBS Option

    If an external speaker is going to be used the EN Navigator PBS must be ordered with this -ES option. This -ES option requires that a different circuit board assembly which has additional components and amplifier, be installed in the PBS during assembly. On the Part Number order sheet there is a location for this -ES option to be entered to ensure you get this option included in the EN2 or EN4 Navigator PBS .

  • -EB External Button PBS Option (For 2-Wire only)

    An EN2 Navigator PBS can be ordered with this -EB option which includes additional components and a terminal block to allow a standard contact closure button, or Polara Bulldog button to be connected to the EN2 PBS and put in a call. This external button option is typically used for bike lane buttons, horse crossing buttons, or custom configurations where a second button is needed in addition to the Navigator PBS. On the Part Number order sheet there is a location for this -EB option to be entered to ensure you get this option included in the EN2 Navigator PBS. Note: This option is not required on EN4 Push Button Stations. On an EN4 the external button wires can simply be connected to the EN4 button wire terminal block.

  • S02 PBS Firmware Option

    This is a special firmware option applicable only to Canada. On the Part Number order sheet there is a location for this S02 option to be entered to ensure you get this option included in the EN2 Navigator PBS .

  • CCU-BRKT

    This mount is designed to hold a CCU2EN or iCCU-S/BIU type control unit and bolt to a rack channel with EIA universal spacing.

    All features are mirrored so that it can be mounted on the left or right rack channel.

    Read More

  • 2-Wire EZCOMM Navigator APS System Installation Manual

    This is the complete manual on the Installation of a 2-Wire Navigator System. A copy of this manual and the companion Operation Manual should be kept in the traffic signal controller cabinet. The information in this manual applies to EZ Communicator systems containing version 4.00 and later firmware.

    Read More

  • 2-Wire Navigator APS System Operation Manual

    This is the complete manual on the Operation and Features of the 2-Wire Navigator system. A copy of this manual and the companion Installation Manual should be kept in the traffic signal controller cabinet. The information in this manual applies to EZ Communicator systems containing version 4.00 and later firmware.

    Read More

  • EZ APS TOOLBOX APP INSTALLER DOWNLOAD

    This is the Toolbox for use with EN2 and EN4 products.

    Read More

  • Preparing Custom Voice Messages

    Programming custom messages in the field requires a laptop, USB A/B cable and the Polara EZ APS ToolBox software. The software must be installed and messages prepared prior to installation of the EPBSs on the intersection.

    Read More

  • EZ Communicator Navigator 2-Wire Troubleshooting Guide

    Read More

  • Advanced Network Configuration

    The CCU2EN comes with the IP address statically assigned to 192.168.1.223 to allow for easy configuration from a laptop. This document details the process for customizing the network configuration for use when connecting to your internal network.

    Read More

  • CCU2EN Ethernet Module Firmware Update Files

    The firmware update files available here are to correct an issue with some CCU2EN's where the MAC address gets reported incorrectly preventing multiple CCU2EN's from communicating on the same network. If you encounter a CCU2EN that has issues networking to the central office, please download the firmware files from the link below and update the firmware by following the steps in the Readme file also included with this link.

    Read More

  • Preemption Adapter Installation Sheet

    This document describes how to install a Preemption Adapter

    Read More

  • E-Configurator Manual

    Operation Manual for the E-Configurator handheld configurator.

    Read More